FIRGLO Decorative

FIRGLO Decorative Coating

 

700 Full-Gloss Level 90% RAL****

701 Semi-Gloss Level 50% RAL****

703 Mat-Gloss Level 10% RAL****

 

A decorative protective coating, can be used as a single coat finish or two coat using Firglo 70 primer finish on bare ferrous or aluminium coated metal surfaces.

 

Colour: - Full colour range to RAL standard

 

Preparation: - All surfaces should be free of rust; scale and weld spatter, be suitably degreased and dried.

 

Application Method: - Electrostatic Spray or Conventional Spray (Plus 10% Thinners)

 

Dry Film Thickness: - 15 to 30µ (plus primer total 35 to 60µ)

 

Wet Film Thickness: - 45 to 90µ (plus primer total 95 to 165µ)

 

Heat Resistance: - Moderate

 

Drying Time: - Surface dry 20 mins. Hard dry 4 hours. Dry by stoving for 15 mins @ 65°C.

 

Salt Spray: - 96 hours to ASTM B117 (plus primer 500 hours)

 

Bend Test: - 6mm to BS3900 Part E1

 

Scratch Test: -1200grms to BS3900 Part E2

 

Cross Hatch: - Classification 0 to BS3900 Part E6

 

Chip Test: - Rating 3 to BS Au148 Part 15

 

Primer: - FIRGLO 70 Anti-corrosive chassis primer.